+66.(0)2.149 2642 – 3
Hotline
6 Key Characteristics of Fluoro Mold Release: Fluoropolymer Mold Coating That Factories Should Know
If your factory is facing problems withdefective workpieces, rapid mold wear, or high maintenance costs, Fluoropolymer mold coating might be the answer you are looking for. Fluoro Mold Release is a mold coating product manufactured using Fluoropolymer technology from Japan, imported and distributed in Thailand by VOV International, to effectively help improve workpiece quality, prevent breakage, and extend mold lifespan.
In this article, we will introduce you to the 6 outstanding characteristics of Fluoro Mold Release that differentiate it from general mold coatings in the market, along with technical information that will help the production department make confident decisions.
Table of Content
Fluoro Mold Release: What is Fluoropolymer mold release coating?
Fluoro Mole Release คือ is a mold coating agent whose main component is Fluoropolymer, a high-quality fluoropolymer substance from Japan. It features outstanding properties in terms of lubricity, heat resistance, and chemical resistance. It helps reduce friction between the workpiece and the mold, making the workpiece easy to release from the mold, resulting in a smooth and beautiful surface, and helping to effectively extend the lifespan of the mold.
Fluoro Mold Release is one of the Fluoro Chemicals products that VOV directly imports from Japan, coming complete with technical know-how and international manufacturing standards. It is suitable for all types of manufacturing industries requiring highest precision and quality.
6 Key Characteristics of Fluoro Mold Release
Fluoro Mold Release from VOV International stands out with 6 main characteristics that meet the manufacturing process demands of modern industries as follows:
1. Reduce The Defects Of The Work Piece
An ultra-thin film of Fluoropolymer helps create a smooth and uniform coating layer on the mold surface. As a result, the manufactured workpieces have a smooth, flawless surface without scratches, drag marks, or defects caused by sticking to the mold. This significantly reduces the reject rate and increases production line efficiency, making it highly suitable for industries requiring high workpiece quality, such as electronic components, automotive, and medical devices.
2. Long Lasting Coating Film
Fluoropolymer coating film exhibits clearly higher durability than conventional Silicone or Petroleum-based mold coatings. It does not peel off easily even under severe manufacturing conditions, helping to reduce the frequency of spraying, minimize production line shutdowns for maintenance, and save coating costs in the long term.
3. Easy And Clean Coating
The non-stick property of Fluoropolymer prevents the mold surface from accumulating dirt, material scraps, or residues from the manufacturing process. It can be easily cleaned with just a gentle wipe, reducing downtime for cleaning the mold between production cycles and minimizing the use of chemical cleaners that might corrode the mold surface.
4. Mold Coating Film Thinner Than Other Types at 1×10⁻⁸ mm (Thin Film Thickness 10 nm)
The ultra-thinness of the coating film at the nanometer level (10 nm) or 1×10⁻⁸ mm ensures absolutely no impact on the dimensional accuracy of the workpiece. It is highly suitable for manufacturing components requiring high precision at the micron level, such as electronic components, semiconductors, medical devices, or optical parts, where thicker coatings could cause dimensional deviation in the workpiece.
5. High Operating Temperature up to 200 °C
Fluoro Mold Release can withstand manufacturing temperatures up to 200°C while its coating efficiency remains completely intact without degradation. It is suitable for Injection Molding, Die Casting, Compression Molding, or other molding processes that utilize high heat, where conventional mold coatings might degrade or lose efficiency at high temperatures.
6. Safe And Non Toxic — ASTM F963-16 And ELV
Fluoro Mold Release has passed 2 international safety standard certifications: ASTM F963-16 (Chemical Safety Standard) and the ELV Directive (End-of-Life Vehicle Directive of the European Union, which prohibits the use of heavy metals). It contains no hazardous heavy metals such as lead, mercury, cadmium, or chromium, ensuring safety for operators and being environmentally friendly, making it suitable for industries requiring high safety standards.
Comparison: Fluoro Mold Release vs Conventional Mold Coatings
The comparison table below highlights the key differences between Fluoro Mold Release and other types of mold coatings, enabling you to make an informed decision in selecting the product that best suits your manufacturing process.
| Properties | Fluoro Mole Release | Conventional Coatings |
|---|---|---|
| Coating Material | Fluoropolymer (Japan) | Silicone หรือ Petroleum-based |
| Film Thickness | 10 nm (1 × 10-8 mm) – Does not affect workpiece dimensions | Thicker – May impact precision |
| Temperature Resistance | Up to 200°C | Lower – Degrades at high heat |
| Durability | High – Long-lasting adhesion, reduces spraying frequency | Requires frequent re-spraying |
| Safety | ASTM F963-16 + ELV – No heavy metals | Depends on the manufacturer; not all are certified |
| Cleaning | Easy – Non-stick, no residue build-up | Requires additional chemicals |
| Effect on Workpiece Quality | Reduces reject rate – Smooth and beautiful workpiece surface | May cause defects or mold-sticking marks |
Frequently Asked Questions (FAQ)
Q: What manufacturing processes is Fluoro Mold Release suitable for?
Fluoro Mold Release is suitable for all types of mold-based manufacturing processes, whether Injection Molding, Die Casting, Compression Molding, or Rubber Molding. It is especially ideal when high-precision workpieces, smooth surfaces, and processes utilizing heat up to 200°C are required.
Q: How does a Fluoropolymer mold coating differ from a Silicone coating?
Fluoropolymer coatings, such as Fluoro Mold Release, have a nanometer-level film thickness (10 nm), which does not affect workpiece dimensions. They withstand higher temperatures than Silicone Release Agents and possess superior durability, thereby reducing spraying frequency and saving production costs in the long term.
Q: How often does Fluoro Mold Release need to be sprayed?
Because the Fluoropolymer coating film exhibits high durability, you do not need to spray the agent every production cycle like conventional coatings. The frequency depends on the type of material manufactured, temperature, and number of production cycles. VOV's expert team can provide tailored recommendations based on your specific manufacturing process.
Q: Is Fluoro Mold Release safe for industries with strict chemical regulations?
Fluoro Mold Release complies with ASTM F963-16 and ELV Directive standards, which confirm that it contains no heavy metals and is non-toxic. It is suitable for the automotive, electronics, and medical device industries. For industries with specific regulations, contacting VOV for further verification is recommended.
Q: What mold materials can Fluoro Mold Release be applied to?
Fluoro Mold Release can be used with various types of molds, including steel, aluminum, cast iron, and alloys, as well as molds for plastic, rubber, and metal shaping, covering a wide range of manufacturing industries.
Summary: Why Choose Fluoro Mold Release?
Fluoro Mold Release from VOV International is a high-quality Fluoropolymer mold coating that meets the demands of modern manufacturing industries with 6 comprehensive characteristics: from reducing workpiece defects, long-lasting durable film, easy cleaning, nanometer-level thin film, heat resistance up to 200°C, to safety certified by international standards ASTM and ELV.
Whether you manufacture automotive parts, electronics, medical devices, or other types of industrial products, Fluoro Mold Release is ready to help enhance your manufacturing process efficiency, reduce the reject rate, and save costs in the long term.
Share the Post:
